Cleaning Your Bicycle

Bicycles are ridden on paths, off paths, and even ontrying to clean. You should then wait ten minutes after
gravel. When you ride your bike off paths or on theusing the power washer before going onto the next
gravel the bike can get very dirty from all the dust andstep.
dirt particles from the ground. Make sure you followThen, use the pressure washers on the bike; this will
the steps below for bicycle cleaning advice.allow you to get into the parts of the bike that you
You should start by collecting all the tools needed tocan't get into with your fingers. If you are satisfied with
clean a bike. Gather together a degreaser, (you canhow clean the bike is, proceed to the next step. If you
use Shout) a power washer, oil, and a wet dry vac. Ifare not satisfied, repeat the above steps until you are.
the bike is really dirty start by following this step: powerNext, use a wet dry vac to dry off all the water from
wash the bike, but be careful not to use a powerfulthe bike.
setting. You want to avoid any powerful settingYou can then oil the chain to make it better at riding.
because you can chip the paint off the bike.Once you are through oiling, use a rag to wipe off the
Next, spray the degreaser that you have on all theoil. You are now able to ride your shiny clean bike! If
parts of the bike that are dirty. Shout works well formore dirt gets on it, make sure to clean it as much as
that step because it does not drip off the bike whileyou can to avoid rusting.